LINUX/UNIX Tutorials Continued .... 

 

Please read Our official Blogs for similar information.

Networx Technologies official Blogs :

http://ccnatraininginchandigarh.blogspot.in/

http://networxtech.blogspot.in/

http://ccnachd.blogspot.in/

http://networxtechnologies.blogspot.in/

Official Web Site : www.networx256.com

FB page: https://www.facebook.com/networx256

5.1 File system security (access rights)

In your unixstuff directory, type

% ls -l (l for long listing!)

You will see that you now get lots of details about the contents of your directory, similar to the example below.

Each file (and directory) has associated access rights, which may be found by typing ls -l. Also, ls -lg gives additional information as to which group owns the file (beng95 in the following example):

-rwxrw-r-- 1 ee51ab beng95 2450 Sept29 11:52 file1

In the left-hand column is a 10 symbol string consisting of the symbols d, r, w, x, -, and, occasionally, s or S. If d is present, it will be at the left hand end of the string, and indicates a directory: otherwise - will be the starting symbol of the string.
The 9 remaining symbols indicate the permissions, or access rights, and are taken as three groups of 3.

• The left group of 3 gives the file permissions for the user that owns the file (or directory) (ee51ab in the above example);
• the middle group gives the permissions for the group of people to whom the file (or directory) belongs (eebeng95 in the above example);
• the rightmost group gives the permissions for all others.

The symbols r, w, etc., have slightly different meanings depending on whether they refer to a simple file or to a directory.

Access rights on files.

• r (or -), indicates read permission (or otherwise), that is, the presence or absence of permission to read and copy the file
• w (or -), indicates write permission (or otherwise), that is, the permission (or otherwise) to change a file
• x (or -), indicates execution permission (or otherwise), that is, the permission to execute a file, where appropriate

Access rights on directories.

• r allows users to list files in the directory;
• w means that users may delete files from the directory or move files into it;
• x means the right to access files in the directory. This implies that you may read files in the directory provided you have read permission on the individual files.

So, in order to read a file, you must have execute permission on the directory containing that file, and hence on any directory containing that directory as a subdirectory, and so on, up the tree.

Some examples

-rwxrwxrwx	a file that everyone can read, write and execute (and delete).
-rw-------	a file that only the owner can read and write - no-one else can read or write and no-one has execution rights (e.g. your mailbox file).

5.2 Changing access rights

chmod (changing a file mode)

Only the owner of a file can use chmod to change the permissions of a file. The options of chmod are as follows

Symbol	Meaning
u	user
g	group
o	other
a	all
r	read
w	write (and delete)
x	execute (and access directory)
+	add permission
-	take away permission

For example, to remove read write and execute permissions on the file biglist for the group and others, type

% chmod go-rwx biglist

This will leave the other permissions unaffected.
To give read and write permissions on the file biglist to all,

% chmod a+rw biglist

Exercise 5a

Try changing access permissions on the file science.txt and on the directory backups
Use ls -l to check that the permissions have changed.

5.3 Processes and Jobs

A process is an executing program identified by a unique PID (process identifier). To see information about your processes, with their associated PID and status, type

% ps

A process may be in the foreground, in the background, or be suspended. In general the shell does not return the UNIX prompt until the current process has finished executing.
Some processes take a long time to run and hold up the terminal. Backgrounding a long process has the effect that the UNIX prompt is returned immediately, and other tasks can be carried out while the original process continues executing.

Running background processes

To background a process, type an & at the end of the command line. For example, the command sleep waits a given number of seconds before continuing. Type

% sleep 10

This will wait 10 seconds before returning the command prompt %. Until the command prompt is returned, you can do nothing except wait.
To run sleep in the background, type

% sleep 10 &

[1] 6259

The & runs the job in the background and returns the prompt straight away, allowing you do run other programs while waiting for that one to finish.
The first line in the above example is typed in by the user; the next line, indicating job number and PID, is returned by the machine. The user is be notified of a job number (numbered from 1) enclosed in square brackets, together with a PID and is notified when a background process is finished. Backgrounding is useful for jobs which will take a long time to complete.

Backgrounding a current foreground process

At the prompt, type

% sleep 1000

You can suspend the process running in the foreground by typing ^Z, i.e.hold down the [Ctrl] key and type [z]. Then to put it in the background, type

% bg

Note: do not background programs that require user interaction e.g. vi

5.4 Listing suspended and background processes

When a process is running, backgrounded or suspended, it will be entered onto a list along with a job number. To examine this list, type

% jobs

An example of a job list could be

[1] Suspended sleep 1000
[2] Running netscape
[3] Running matlab

To restart (foreground) a suspended processes, type

% fg %jobnumber

For example, to restart sleep 1000, type

% fg %1

Typing fg with no job number foregrounds the last suspended process.

5.5 Killing a process

kill (terminate or signal a process)

It is sometimes necessary to kill a process (for example, when an executing program is in an infinite loop)
To kill a job running in the foreground, type ^C (control c). For example, run

% sleep 100
^C

To kill a suspended or background process, type

% kill %jobnumber

For example, run

% sleep 100 &
% jobs

If it is job number 4, type

% kill %4

To check whether this has worked, examine the job list again to see if the process has been removed.

ps (process status)

Alternatively, processes can be killed by finding their process numbers (PIDs) and using kill PID_number

% sleep 1000 &
% ps

PID TT S TIME COMMAND
20077 pts/5 S 0:05 sleep 1000
21563 pts/5 T 0:00 netscape
21873 pts/5 S 0:25 nedit

To kill off the process sleep 1000, type

% kill 20077

and then type ps again to see if it has been removed from the list.
If a process refuses to be killed, uses the -9 option, i.e. type

% kill -9 20077

Note: It is not possible to kill off other users' processes !!!

Summary

Command	Meaning
ls -lag	list access rights for all files
chmod [options] file	change access rights for named file
command &	run command in background
^C	kill the job running in the foreground
^Z	suspend the job running in the foreground
bg	background the suspended job
jobs	list current jobs
fg %1	foreground job number 1
kill %1	kill job number 1
ps	list current processes
kill 26152	kill process number 26152

The Most Common Jobs for Cisco CCNP Certified Professionals 

Please read Our official Blogs for similar information.

Networx Technologies official Blogs :

http://ccnatraininginchandigarh.blogspot.in/

http://networxtech.blogspot.in/

http://ccnachd.blogspot.in/

http://networxtechnologies.blogspot.in/

Official Web Site : www.networx256.com

FB page: https://www.facebook.com/networx256

-------------------------------------------------------------------------------------------------

The economy might still be limping along, but the IT industry remains as healthy as ever. IT outsourcing companies have become popular in recent years, but larger companies from hospitals to manufacturers are also hiring for a continually growing workforce of in-house IT professionals. If anything, the high job demand present in the early ’00s has increased since the 2008 recession. Networking, a distinct career path in IT, remains one of the main stays.

Cisco Certified Network Professional

CCNP certification requires IT employees to pass three exams: ROUTE, SWITCH, and TSHOOT. The CCNP certification asserts that the professional knows how to install, repair, and maintain Cisco networking equipment. They can design local and wide area networks, create virtual networks, and can integrate voice and video services.
Although there are dozens of networking certifications, CCNP certification remains in demand due to the prevalence of Cisco networking equipment, the difficulty of the exam and the fact that people who can work on Cisco routers, can pretty much work on the majority of the competition’s routers. CCNP certification holders often pursue other Cisco certifications including CCDP, which focuses on designing networking, and CCNP variants like CCNP Security and CCNP Wireless. These additional certifications provide CCNP certified professionals with clear specialization and advancement opportunities.

Network Engineer

Network engineers ensure that their networks always run smoothly. They must understand the ins and outs of networking from infrastructure to security, and they help organize the company’s various networking teams. A network engineer does a little bit of everything from helping to design the network to making sure that end-users can connect and aren’t running into significant congestion.

Systems Engineers

Systems engineers are similar to network engineers, but they typically focus more on designing and installing networks rather than monitoring them. Both systems and network engineers lead networking teams. They organize projects and help out where needed, and they keep track of a company’s networking infrastructure. Because systems and network engineers have very similar jobs, the two titles are often used interchangeably.

Network Technician

Technicians handle the day-to-day tasks of running a network. There will often be some overlap between an engineer’s duties and those of a technician, but for the most part, technicians are responsible for repairing equipment like routers, installing new cables, and troubleshooting problems on the spot. Technicians can configure routers at the end-user’s location and install software, and they can also assist network and systems engineers in installing new infrastructure.
For complex and difficult problems, technicians can escalate the issue to network engineers or administrators, who are typically more experienced and are better equipped to handle such problems. Technicians should have a firm understanding of networking protocols and equipment standards, and they need to have the patience and expertise required to diagnose and solve common networking issues.
Network administrators are similar to both network engineers and network technicians. They work directly with the end-user to solve local issues, but they also monitor the entire network. Administrators tend to have greater access within a network to diagnose issues and solve them, so technicians will often turn to network administrators for problems they cannot solve themselves.

Support Engineer

Support engineers fulfill a very different role. Instead of visiting job sites directly, they offer phone, live chat, or e-mail support for clients. They still need to understand networking protocols and equipment, but they won’t repair faulty equipment themselves.
They should have strong communications skills to communicate clearly with end-users of varying technical backgrounds including clients who may know little or nothing about the products or services they are using. Some support engineers will also use remote access services to view client computer and router information and troubleshoot software and hardware issues.
Like network technicians, support engineers will occasionally escalate difficult issues to network engineers and administrators, but they can resolve most support tickets on their own. They will also need to instruct clients on how to operate their equipment and perform updates.

UNIX Tutorial Day 2

1.1 Listing files and directories

ls (list)

When you first login, your current working directory is your home directory. Your home directory has the same name as your user-name, for example, ee91ab, and it is where your personal files and subdirectories are saved.
To find out what is in your home directory, type

% ls

The ls command ( lowercase L and lowercase S ) lists the contents of your current working directory.

There may be no files visible in your home directory, in which case, the UNIX prompt will be returned. Alternatively, there may already be some files inserted by the System Administrator when your account was created.
ls does not, in fact, cause all the files in your home directory to be listed, but only those ones whose name does not begin with a dot (.) Files beginning with a dot (.) are known as hidden files and usually contain important program configuration information. They are hidden because you should not change them unless you are very familiar with UNIX!!!
To list all files in your home directory including those whose names begin with a dot, type

% ls -a

As you can see, ls -a lists files that are normally hidden.

ls is an example of a command which can take options: -a is an example of an option. The options change the behaviour of the command. There are online manual pages that tell you which options a particular command can take, and how each option modifies the behaviour of the command. (See later in this tutorial)

1.2 Making Directories

mkdir (make directory)

We will now make a subdirectory in your home directory to hold the files you will be creating and using in the course of this tutorial. To make a subdirectory called unixstuff in your current working directory type

% mkdir unixstuff

To see the directory you have just created, type

% ls

1.3 Changing to a different directory 

cd (change directory)

The command cd directory means change the current working directory to 'directory'. The current working directory may be thought of as the directory you are in, i.e. your current position in the file-system tree.
To change to the directory you have just made, type

% cd unixstuff

Type ls to see the contents (which should be empty)

Exercise 1a

Make another directory inside the unixstuff directory called backups

1.4 The directories . and ..

Still in the unixstuff directory, type

% ls -a

As you can see, in the unixstuff directory (and in all other directories), there are two special directories called (.) and (..)

The current directory (.)

In UNIX, (.) means the current directory, so typing

% cd .

NOTE: there is a space between cd and the dot

means stay where you are (the unixstuff directory).
This may not seem very useful at first, but using (.) as the name of the current directory will save a lot of typing, as we shall see later in the tutorial.

The parent directory (..)

(..) means the parent of the current directory, so typing

% cd ..

will take you one directory up the hierarchy (back to your home directory). Try it now.
Note: typing cd with no argument always returns you to your home directory. This is very useful if you are lost in the file system.

1.5 Pathnames

pwd (print working directory)

Pathnames enable you to work out where you are in relation to the whole file-system. For example, to find out the absolute pathname of your home-directory, type cd to get back to your home-directory and then type

% pwd

The full pathname will look something like this -

/home/its/ug1/ee51vn

which means that ee51vn (your home directory) is in the sub-directory ug1 (the group directory),which in turn is located in the its sub-directory, which is in the home sub-directory, which is in the top-level root directory called " / " .

Exercise 1b

Use the commands cd, ls and pwd to explore the file system.
(Remember, if you get lost, type cd by itself to return to your home-directory)

1.6 More about home directories and pathnames

Understanding pathnames

First type cd to get back to your home-directory, then type

% ls unixstuff

to list the conents of your unixstuff directory.
Now type

% ls backups

You will get a message like this -

backups: No such file or directory

The reason is, backups is not in your current working directory. To use a command on a file (or directory) not in the current working directory (the directory you are currently in), you must either cd to the correct directory, or specify its full pathname. To list the contents of your backups directory, you must type

% ls unixstuff/backups

~ (your home directory)

Home directories can also be referred to by the tilde ~ character. It can be used to specify paths starting at your home directory. So typing

% ls ~/unixstuff

will list the contents of your unixstuff directory, no matter where you currently are in the file system.
What do you think

% ls ~

would list?
What do you think

% ls ~/..

would list?

Summary

Command	Meaning
ls	list files and directories
ls -a	list all files and directories
mkdir	make a directory
cd directory	change to named directory
cd	change to home-directory
cd ~	change to home-directory
cd ..	change to parent directory
pwd	display the path of the current directory

 UNIX/Linux Beginners Guide ( Day 1 )

UNIX Introduction

What is UNIX?

UNIX is an operating system which was first developed in the 1960s, and has been under constant development ever since. By operating system, we mean the suite of programs which make the computer work. It is a stable, multi-user, multi-tasking system for servers, desktops and laptops.
UNIX systems also have a graphical user interface (GUI) similar to Microsoft Windows which provides an easy to use environment. However, knowledge of UNIX is required for operations which aren't covered by a graphical program, or for when there is no windows interface available, for example, in a telnet session.

Types of UNIX

There are many different versions of UNIX, although they share common similarities. The most popular varieties of UNIX are Sun Solaris, GNU/Linux, and MacOS X.
Here in the School, we use Solaris on our servers and workstations, and Fedora Linux on the servers and desktop PCs.

The UNIX operating system

The UNIX operating system is made up of three parts; the kernel, the shell and the programs.

The kernel

The kernel of UNIX is the hub of the operating system: it allocates time and memory to programs and handles the filestore and communications in response to system calls.
As an illustration of the way that the shell and the kernel work together, suppose a user types rm myfile (which has the effect of removing the file myfile). The shell searches the filestore for the file containing the program rm, and then requests the kernel, through system calls, to execute the program rm on myfile. When the process rm myfile has finished running, the shell then returns the UNIX prompt % to the user, indicating that it is waiting for further commands.

The shell

The shell acts as an interface between the user and the kernel. When a user logs in, the login program checks the username and password, and then starts another program called the shell. The shell is a command line interpreter (CLI). It interprets the commands the user types in and arranges for them to be carried out. The commands are themselves programs: when they terminate, the shell gives the user another prompt (% on our systems).
The adept user can customise his/her own shell, and users can use different shells on the same machine. Staff and students in the school have the tcsh shell by default.
The tcsh shell has certain features to help the user inputting commands.
Filename Completion - By typing part of the name of a command, filename or directory and pressing the [Tab] key, the tcsh shell will complete the rest of the name automatically. If the shell finds more than one name beginning with those letters you have typed, it will beep, prompting you to type a few more letters before pressing the tab key again.
History - The shell keeps a list of the commands you have typed in. If you need to repeat a command, use the cursor keys to scroll up and down the list or type history for a list of previous commands.

Files and processes

Everything in UNIX is either a file or a process.
A process is an executing program identified by a unique PID (process identifier).
A file is a collection of data. They are created by users using text editors, running compilers etc.
Examples of files:

• a document (report, essay etc.)
• the text of a program written in some high-level programming language
• instructions comprehensible directly to the machine and incomprehensible to a casual user, for example, a collection of binary digits (an executable or binary file);
• a directory, containing information about its contents, which may be a mixture of other directories (subdirectories) and ordinary files.

The Directory Structure

All the files are grouped together in the directory structure. The file-system is arranged in a hierarchical structure, like an inverted tree. The top of the hierarchy is traditionally called root (written as a slash / )

In the diagram above, we see that the home directory of the undergraduate student "ee51vn" contains two sub-directories (docs and pics) and a file called report.doc.
The full path to the file report.doc is "/home/its/ug1/ee51vn/report.doc"

Starting an UNIX terminal

To open an UNIX terminal window, click on the "Terminal" icon from Applications/Accessories menus.

An UNIX Terminal window will then appear with a % prompt, waiting for you to start entering commands.