Friday, July 31, 2009

Embedded systems Introduction

Embedded system

Embedded system is a system in which computer is completely encapsulated by the device it controls. As we cannot take the computer everywhere and for every device. It performs the pre-defined tasks and without many peripherals like keyboard, mouse, monitor etc. It has done miracles in technology.

Embedded system is the combination of software and hardware. Software is written and stored in the ROM or Flash memory of the microcontroller. Then this programmed microcontroller works according to that software with limited hardware. It has reduced the cost of devices due to decreasing the number of electronic components. Day by day the microcontroller is being encapsulating for more and more data storage and gaining high speed.

An embedded system is a special-purpose computer system designed to perform one or a few dedicated functions, often with real-time computing constraints. It is usually embedded as part of a complete device including hardware and mechanical parts. In contrast, a general-purpose computer, such as a personal computer, can do many different tasks depending on programming. Embedded systems control many of the common devices in use today.

Since the embedded system is dedicated to specific tasks, design engineers can optimize it, reducing the size and cost of the product, or increasing the reliability and performance. Some embedded systems are mass-produced, benefiting from economies of scale.

Physically, embedded systems range from portable devices such as digital watches and MP4 players, to large stationary installations like traffic lights, factory controllers, or the systems controlling nuclear power plants. Complexity varies from low, with a single microcontroller chip, to very high with multiple units, peripherals and networks mounted inside a large chassis or enclosure.

In general, "embedded system" is not an exactly defined term, as many systems have some element of programmability. For example, Handheld computers share some elements with embedded systems — such as the operating systems and microprocessors which power them — but are not truly embedded systems, because they allow different applications to be loaded and peripherals to be connected.

Thursday, February 19, 2009

Career Certifications & Paths CCNA


CCNA Certification

Cisco Certified Network Associate (CCNA®) validates the ability to install, configure, operate, and troubleshoot medium-size route and switched networks, including implementation and verification of connections to remote sites in a WAN. CCNA curriculum includes basic mitigation of security threats, introduction to wireless networking concepts and terminology, and performance-based skills. This new curriculum also includes (but is not limited to) the use of these protocols: IP, Enhanced Interior Gateway Routing Protocol (EIGRP), Serial Line Interface Protocol Frame Relay, Routing Information Protocol Version 2 (RIPv2),VLANs, Ethernet, access control lists (ACLs).

CCNA syllabus



CCNA Prerequisites
No prerequisites

CCNA Exams & Recommended Training
Required Exam(s)
Recommended Training
640-802 CCNA Interconnecting Cisco Networking Devices Part 1 (ICND1) v1.0
Interconnecting Cisco Networking Devices Part 2 (ICND2) v1.0

OR

Required Exam(s)
Recommended Training
640-822 ICND1 Interconnecting Cisco Networking Devices Part 1 (ICND1) v1.0
640-816 ICND2 Interconnecting Cisco Networking Devices Part 2 (ICND2) v1.0